Side by side
Manual versus hydraulic is a floor decision, not a brochure claim. Pick up to 4 models — the table uses the same figures as each product page.
Add or remove models
| Property | Clay Cutting MachineKE-CC8 | DC Pottery WheelKE-DPW | Fully Automatic Hydraulic PressKE-H10 | Toggle PressKE-T5 |
|---|---|---|---|---|
| Series | CC | DPW | H | T |
| Pressing force(tonnes) | — | — | 15 | — |
| Output(pieces/day) | — | — | — | — |
| Output conditions | — | — | — | — |
| Column height(ft) | — | — | — | — |
| Power | — | 230V AC single phase | — | — |
| What it is for | Clay preparation ahead of forming — sized for roughly 5–7 clay-making machines on the line. Automatic clay feeding is available on request. | Professional potters and ceramic production — diyas, pots, bowls, vases and other clay articles. | Continuous production of diyas, kullads and bowls with minimum manpower on the line. | Medium clay and ceramic articles — 5 in diyas, 150 ml kullads, tulsi kyaras, matkis and bowls to 150 ml. |
| Will not | Sized for roughly 5–7 clay-making machines. For ten or more presses on the line, see KE-CC10. | A throwing wheel — it does not press or cut clay. For pressing, see the T or H series. | A fully automatic 15 tonne line. Not suited where automatic clay feeding and conveyor output are unnecessary — a toggle or H1/H2 will cost less to run for small batches. | Not rated for diyas above 5 inch diameter or kullads above 150 ml. For larger pieces, see KE-T6 and above. |
WhatsApp Kavan (opens in a new tab) if you want help choosing for your floor.