Side by side
Manual versus hydraulic is a floor decision, not a brochure claim. Pick up to 4 models — the table uses the same figures as each product page.
Add or remove models
| Property | Clay Cutting MachineKE-CC8 | Industrial Toggle PressKE-T7 | PugmillKE-PM1 | Fully Automatic Hydraulic PressKE-H10 |
|---|---|---|---|---|
| Series | CC | T | PM | H |
| Pressing force(tonnes) | — | — | — | 15 |
| Output(pieces/day) | — | — | — | — |
| Output conditions | — | — | — | — |
| Column height(ft) | — | — | — | — |
| Power | — | — | 230V AC single phase (three phase optional) | — |
| What it is for | Clay preparation ahead of forming — sized for roughly 5–7 clay-making machines on the line. Automatic clay feeding is available on request. | Large-scale clay and ceramic work — 7 in diyas, 350 ml kullads, wall tiles to 200×200 mm, large ceramic fuses and heavy electrical insulators. | Clay mixing and pugging ahead of forming, with covered rotating parts and overload protection. | Continuous production of diyas, kullads and bowls with minimum manpower on the line. |
| Will not | Sized for roughly 5–7 clay-making machines. For ten or more presses on the line, see KE-CC10. | Not rated for diyas above 7 inch diameter, kullads above 350 ml, or wall tiles above 200×200 mm. For heavier continuous pressing, see the hydraulic H series. | Rated 500–800 kg/h. For higher continuous throughput, see KE-PM2. Does not form finished ware — it prepares clay only. | A fully automatic 15 tonne line. Not suited where automatic clay feeding and conveyor output are unnecessary — a toggle or H1/H2 will cost less to run for small batches. |
WhatsApp Kavan (opens in a new tab) if you want help choosing for your floor.