Side by side
Manual versus hydraulic is a floor decision, not a brochure claim. Pick up to 4 models — the table uses the same figures as each product page.
Add or remove models
| Property | H Type Hydraulic PressKE-H2 | Blunger / MixerKE-BM1 | PugmillKE-PM1 | Toggle PressKE-T4.5 |
|---|---|---|---|---|
| Series | H | BM | PM | T |
| Pressing force(tonnes) | 5 | — | — | — |
| Output(pieces/day) | — | — | — | — |
| Output conditions | — | — | — | — |
| Column height(ft) | — | — | — | — |
| Power | — | Single phase or three phase | 230V AC single phase (three phase optional) | — |
| What it is for | Higher throughput than a toggle press across diyas, kullads, bowls, ceramic fuses and insulators. | Small-scale production, laboratories and R&D — clay mixers, POP mixers and glaze mixers. | Clay mixing and pugging ahead of forming, with covered rotating parts and overload protection. | Producers who need both diya and kullad output on one press — 4 in diyas, 80 ml kullads, small clay cups and decorative earthenware. |
| Will not | Rated to 5 tonnes and four diyas or kullads per cycle. Not the right machine for large heavy pieces such as roti tawa; see KE-H5. | Batch options stop at 100 L. For larger slip or glaze batches, see KE-BM2 (up to 1,000 L). | Rated 500–800 kg/h. For higher continuous throughput, see KE-PM2. Does not form finished ware — it prepares clay only. | Not rated for diyas above 4 inch diameter or kullads above 80 ml. For larger pieces, see KE-T5 and above. |
WhatsApp Kavan (opens in a new tab) if you want help choosing for your floor.