Side by side
Manual versus hydraulic is a floor decision, not a brochure claim. Pick up to 4 models — the table uses the same figures as each product page.
Add or remove models
| Property | H Type Hydraulic PressKE-H2 | Toggle PressKE-T4 | Fully Automatic Hydraulic PressKE-H10 | PugmillKE-PM1 |
|---|---|---|---|---|
| Series | H | T | H | PM |
| Pressing force(tonnes) | 5 | — | 15 | — |
| Output(pieces/day) | — | — | — | — |
| Output conditions | — | — | — | — |
| Column height(ft) | — | — | — | — |
| Power | — | — | — | 230V AC single phase (three phase optional) |
| What it is for | Higher throughput than a toggle press across diyas, kullads, bowls, ceramic fuses and insulators. | Small to medium ceramic articles — diyas to 3 in, agarbatti stands (four per cycle), electrical insulators, porcelain sockets and ceramic foundry filters. | Continuous production of diyas, kullads and bowls with minimum manpower on the line. | Clay mixing and pugging ahead of forming, with covered rotating parts and overload protection. |
| Will not | Rated to 5 tonnes and four diyas or kullads per cycle. Not the right machine for large heavy pieces such as roti tawa; see KE-H5. | Not rated for diyas above 3 inch diameter. For larger diyas, see KE-T4.5 and above. | A fully automatic 15 tonne line. Not suited where automatic clay feeding and conveyor output are unnecessary — a toggle or H1/H2 will cost less to run for small batches. | Rated 500–800 kg/h. For higher continuous throughput, see KE-PM2. Does not form finished ware — it prepares clay only. |
WhatsApp Kavan (opens in a new tab) if you want help choosing for your floor.