Side by side
Manual versus hydraulic is a floor decision, not a brochure claim. Pick up to 4 models — the table uses the same figures as each product page.
Add or remove models
| Property | C Type Hydraulic PressKE-H1 | Industrial Toggle PressKE-T7 | Clay Cutting MachineKE-CC8 | PugmillKE-PM1 |
|---|---|---|---|---|
| Series | H | T | CC | PM |
| Pressing force(tonnes) | 3 | — | — | — |
| Output(pieces/day) | — | — | — | — |
| Output conditions | — | — | — | — |
| Column height(ft) | — | — | — | — |
| Power | — | — | — | 230V AC single phase (three phase optional) |
| What it is for | Diyas, kullads and bowls where a compact footprint and easy die changes matter. | Large-scale clay and ceramic work — 7 in diyas, 350 ml kullads, wall tiles to 200×200 mm, large ceramic fuses and heavy electrical insulators. | Clay preparation ahead of forming — sized for roughly 5–7 clay-making machines on the line. Automatic clay feeding is available on request. | Clay mixing and pugging ahead of forming, with covered rotating parts and overload protection. |
| Will not | A 3 tonne C-type press — not the right machine for large or heavy pieces such as roti tawa or large bowls. For those, see KE-H5 or KE-H10. | Not rated for diyas above 7 inch diameter, kullads above 350 ml, or wall tiles above 200×200 mm. For heavier continuous pressing, see the hydraulic H series. | Sized for roughly 5–7 clay-making machines. For ten or more presses on the line, see KE-CC10. | Rated 500–800 kg/h. For higher continuous throughput, see KE-PM2. Does not form finished ware — it prepares clay only. |
WhatsApp Kavan (opens in a new tab) if you want help choosing for your floor.