Side by side
Manual versus hydraulic is a floor decision, not a brochure claim. Pick up to 4 models — the table uses the same figures as each product page.
Add or remove models
| Property | Fully Automatic Hydraulic PressKE-H10 | PugmillKE-PM1 | Toggle PressKE-T4.5 | Toggle PressKE-T4 |
|---|---|---|---|---|
| Series | H | PM | T | T |
| Pressing force(tonnes) | 15 | — | — | — |
| Output(pieces/day) | — | — | — | — |
| Output conditions | — | — | — | — |
| Column height(ft) | — | — | — | — |
| Power | — | 230V AC single phase (three phase optional) | — | — |
| What it is for | Continuous production of diyas, kullads and bowls with minimum manpower on the line. | Clay mixing and pugging ahead of forming, with covered rotating parts and overload protection. | Producers who need both diya and kullad output on one press — 4 in diyas, 80 ml kullads, small clay cups and decorative earthenware. | Small to medium ceramic articles — diyas to 3 in, agarbatti stands (four per cycle), electrical insulators, porcelain sockets and ceramic foundry filters. |
| Will not | A fully automatic 15 tonne line. Not suited where automatic clay feeding and conveyor output are unnecessary — a toggle or H1/H2 will cost less to run for small batches. | Rated 500–800 kg/h. For higher continuous throughput, see KE-PM2. Does not form finished ware — it prepares clay only. | Not rated for diyas above 4 inch diameter or kullads above 80 ml. For larger pieces, see KE-T5 and above. | Not rated for diyas above 3 inch diameter. For larger diyas, see KE-T4.5 and above. |
WhatsApp Kavan (opens in a new tab) if you want help choosing for your floor.