Side by side
Manual versus hydraulic is a floor decision, not a brochure claim. Pick up to 4 models — the table uses the same figures as each product page.
Add or remove models
| Property | Heavy Duty PugmillKE-PM2 | Industrial Toggle PressKE-T7 | Clay Cutting MachineKE-CC8 | Toggle PressKE-T4 |
|---|---|---|---|---|
| Series | PM | T | CC | T |
| Pressing force(tonnes) | — | — | — | — |
| Output(pieces/day) | — | — | — | — |
| Output conditions | — | — | — | — |
| Column height(ft) | — | — | — | — |
| Power | 230V / 415V AC as required | — | — | — |
| What it is for | Continuous clay preparation where higher throughput and a larger hopper are required. | Large-scale clay and ceramic work — 7 in diyas, 350 ml kullads, wall tiles to 200×200 mm, large ceramic fuses and heavy electrical insulators. | Clay preparation ahead of forming — sized for roughly 5–7 clay-making machines on the line. Automatic clay feeding is available on request. | Small to medium ceramic articles — diyas to 3 in, agarbatti stands (four per cycle), electrical insulators, porcelain sockets and ceramic foundry filters. |
| Will not | Prepares clay only — it does not form diyas, kullads or other finished ware. Pair with a press or pottery wheel for forming. | Not rated for diyas above 7 inch diameter, kullads above 350 ml, or wall tiles above 200×200 mm. For heavier continuous pressing, see the hydraulic H series. | Sized for roughly 5–7 clay-making machines. For ten or more presses on the line, see KE-CC10. | Not rated for diyas above 3 inch diameter. For larger diyas, see KE-T4.5 and above. |
WhatsApp Kavan (opens in a new tab) if you want help choosing for your floor.