Side by side
Manual versus hydraulic is a floor decision, not a brochure claim. Pick up to 4 models — the table uses the same figures as each product page.
Add or remove models
| Property | Toggle PressKE-T4 | PugmillKE-PM1 | Clay Cutting MachineKE-CC8 | Blunger / MixerKE-BM1 |
|---|---|---|---|---|
| Series | T | PM | CC | BM |
| Pressing force(tonnes) | — | — | — | — |
| Output(pieces/day) | — | — | — | — |
| Output conditions | — | — | — | — |
| Column height(ft) | — | — | — | — |
| Power | — | 230V AC single phase (three phase optional) | — | Single phase or three phase |
| What it is for | Small to medium ceramic articles — diyas to 3 in, agarbatti stands (four per cycle), electrical insulators, porcelain sockets and ceramic foundry filters. | Clay mixing and pugging ahead of forming, with covered rotating parts and overload protection. | Clay preparation ahead of forming — sized for roughly 5–7 clay-making machines on the line. Automatic clay feeding is available on request. | Small-scale production, laboratories and R&D — clay mixers, POP mixers and glaze mixers. |
| Will not | Not rated for diyas above 3 inch diameter. For larger diyas, see KE-T4.5 and above. | Rated 500–800 kg/h. For higher continuous throughput, see KE-PM2. Does not form finished ware — it prepares clay only. | Sized for roughly 5–7 clay-making machines. For ten or more presses on the line, see KE-CC10. | Batch options stop at 100 L. For larger slip or glaze batches, see KE-BM2 (up to 1,000 L). |
WhatsApp Kavan (opens in a new tab) if you want help choosing for your floor.