Side by side
Manual versus hydraulic is a floor decision, not a brochure claim. Pick up to 4 models — the table uses the same figures as each product page.
Add or remove models
| Property | Toggle PressKE-T4.5 | Heavy Duty PugmillKE-PM2 | Blunger / MixerKE-BM2 | H Type Hydraulic PressKE-H2 |
|---|---|---|---|---|
| Series | T | PM | BM | H |
| Pressing force(tonnes) | — | — | — | 5 |
| Output(pieces/day) | — | — | — | — |
| Output conditions | — | — | — | — |
| Column height(ft) | — | — | — | — |
| Power | — | 230V / 415V AC as required | Single phase or three phase | — |
| What it is for | Producers who need both diya and kullad output on one press — 4 in diyas, 80 ml kullads, small clay cups and decorative earthenware. | Continuous clay preparation where higher throughput and a larger hopper are required. | Ceramic, pottery, tableware, sanitaryware, tiles, refractory, chemical and laboratory mixing where batch size varies. | Higher throughput than a toggle press across diyas, kullads, bowls, ceramic fuses and insulators. |
| Will not | Not rated for diyas above 4 inch diameter or kullads above 80 ml. For larger pieces, see KE-T5 and above. | Prepares clay only — it does not form diyas, kullads or other finished ware. Pair with a press or pottery wheel for forming. | A mixer/blunger — it does not pug or extrude clay. For pugging, see the KE-PM series. | Rated to 5 tonnes and four diyas or kullads per cycle. Not the right machine for large heavy pieces such as roti tawa; see KE-H5. |
WhatsApp Kavan (opens in a new tab) if you want help choosing for your floor.