Side by side
Manual versus hydraulic is a floor decision, not a brochure claim. Pick up to 4 models — the table uses the same figures as each product page.
Add or remove models
| Property | Toggle PressKE-T4.5 | Heavy Duty PugmillKE-PM2 | PugmillKE-PM1 | Clay Cutting MachineKE-CC8 |
|---|---|---|---|---|
| Series | T | PM | PM | CC |
| Pressing force(tonnes) | — | — | — | — |
| Output(pieces/day) | — | — | — | — |
| Output conditions | — | — | — | — |
| Column height(ft) | — | — | — | — |
| Power | — | 230V / 415V AC as required | 230V AC single phase (three phase optional) | — |
| What it is for | Producers who need both diya and kullad output on one press — 4 in diyas, 80 ml kullads, small clay cups and decorative earthenware. | Continuous clay preparation where higher throughput and a larger hopper are required. | Clay mixing and pugging ahead of forming, with covered rotating parts and overload protection. | Clay preparation ahead of forming — sized for roughly 5–7 clay-making machines on the line. Automatic clay feeding is available on request. |
| Will not | Not rated for diyas above 4 inch diameter or kullads above 80 ml. For larger pieces, see KE-T5 and above. | Prepares clay only — it does not form diyas, kullads or other finished ware. Pair with a press or pottery wheel for forming. | Rated 500–800 kg/h. For higher continuous throughput, see KE-PM2. Does not form finished ware — it prepares clay only. | Sized for roughly 5–7 clay-making machines. For ten or more presses on the line, see KE-CC10. |
WhatsApp Kavan (opens in a new tab) if you want help choosing for your floor.