Side by side
Manual versus hydraulic is a floor decision, not a brochure claim. Pick up to 4 models — the table uses the same figures as each product page.
Add or remove models
| Property | Industrial Toggle PressKE-T7 | Blunger / MixerKE-BM2 | Clay Cutting MachineKE-CC8 | H Type Hydraulic PressKE-H2 |
|---|---|---|---|---|
| Series | T | BM | CC | H |
| Pressing force(tonnes) | — | — | — | 5 |
| Output(pieces/day) | — | — | — | — |
| Output conditions | — | — | — | — |
| Column height(ft) | — | — | — | — |
| Power | — | Single phase or three phase | — | — |
| What it is for | Large-scale clay and ceramic work — 7 in diyas, 350 ml kullads, wall tiles to 200×200 mm, large ceramic fuses and heavy electrical insulators. | Ceramic, pottery, tableware, sanitaryware, tiles, refractory, chemical and laboratory mixing where batch size varies. | Clay preparation ahead of forming — sized for roughly 5–7 clay-making machines on the line. Automatic clay feeding is available on request. | Higher throughput than a toggle press across diyas, kullads, bowls, ceramic fuses and insulators. |
| Will not | Not rated for diyas above 7 inch diameter, kullads above 350 ml, or wall tiles above 200×200 mm. For heavier continuous pressing, see the hydraulic H series. | A mixer/blunger — it does not pug or extrude clay. For pugging, see the KE-PM series. | Sized for roughly 5–7 clay-making machines. For ten or more presses on the line, see KE-CC10. | Rated to 5 tonnes and four diyas or kullads per cycle. Not the right machine for large heavy pieces such as roti tawa; see KE-H5. |
WhatsApp Kavan (opens in a new tab) if you want help choosing for your floor.